Filter
Top Products
7444 Voice Terminal
Features
Four Standard Fixed Feature Buttons
CONFERENCE/RING button
DROP/TEST button
TRANSFER button
HOLD button
SELECT button
The SELECT button can be used in three different ways: (The green light next to the SELECT
button goes on steadily when the SELECT button is activated.)
Used with the CONFERENCE/RING button to select one of eight personalized ringing
patterns for incoming calls;
Used with the DROP/TEST button to initiate the Self-Test feature which tests the lights,
ringer, and display;
Used with the SPEAKER/RESET SPKR button to perform an acoustic test of the
environment and adjust the speakerphone to the surrounding acoustic environment for
optimal performance.
Message light
The red Message light goes on when a message is left for the voice terminal user. The light goes
off when the user retrieves the message or when the message is erased.
Call Appearance/Feature Buttons
The 7444D voice terminal has 34 call appearance/feature buttons, each equipped with a red in-
use and a green status light. Usually, at least three of these buttons (the top three in the leftmost
column) are administered as call appearances for the terminal’s primary extension number,
where calls are placed and answered. The rest of the buttons can be used for more call appear-
ances (including bridged appearances of other stations’ extensions) and features. Buttons
administered for features have only their status lights active.
Seven Display Feature Buttons (with a green status light)
The 7444 has seven administrable display feature buttons, each with a green status light. These
buttons can be used for only display features, such as Inspect.
3-224