Filter
Top Products
Dial Mode (#201)
Description
This system option identifies incoming lines as touch-tone or rotary. You should
check with your local phone company if you are not sure which type of line is
being provided to you.
Valid Entries
1 =
Touch-Tone lines ✔
2 =
Rotary lines
Changing Settings
To change the Dial Mode setting for the system, follow these steps from
extension 10:
1.
2.
3.
4.
5.
6.
Press [
Feature
] [
0
] [
0
].
The phone beeps once, and the light next to [ Spkr ] is green flutter.
Press left [
Intercom
] twice.
The light next to left [
Intercom
] is green steady.
Press [
#
] [
2
] [
0
] [
1
].
The Message light is red steady if the current setting is Touch-Tone lines,
red flash if the current setting is Rotary lines.
Press [
1
] to select Touch-Tone lines, or press [
2
] to select Rotary lines.
The Message light changes to show the new setting.
If you make a mistake, begin again at Step 3.
When you are finished, press [
# ] and a three-digit code for another option or
press [
Feature
] [
0
] [
0
].
5-12 Dial Mode (#201)