AT&T 4.1 Telephone User Manual


 
Specifications
B
Capacities
System
206 Module
Extension Jack
4 outside lines via line jacks on
2 outside lines
Maximum 2 devices per extension
two 206 modules or one 206 and
6 extensions
jack, total REN on jack not to
one 200 combination
exceed 2.0* (System phone
12 extensions via extension jacks
REN: 0.0 (zero))
on two 206 modules
200 Module
No more than one system phone
1 Music On Hold device via Music
2 outside lines
On Hold coupler to ext. jack 15
per jack
10 Doorphone/lnternal Hotline/
External Hotline Phone via
10 ext. jacks
Dimensions
206 module
11”(D) x 17”(H) x 1.5”(W) or 27.9 x 43.2 x 3.8 cm
4.5 lbs or 2.0 kgs
and Weights
200 module 11”(D) x 17”(H) x 1.5”(W) or 27.9 x 43.2 x 3.8 cm
4.0 lbs or 1.8 kgs
(approx.)
Two modules
12”(D) x 17”(H) x 5”(W) or 30.0 x 43.2 x 12.7 cm
10.5 lbs or 4.8 kgs
PARTNER-18D phone
9.8”(D) x 3.75”(H) x 7.9”(W) or 24.9 x 9.5 x 20.1 cm 2.4 lbs or 1.1 kgs
PARTNER-18 phone
9.8”(D) x 3.75”(H) x 7.9”(W) or 24.9 x 9.5 x 20.1 cm
2.3 lbs or 1.0 kgs
PARTNER-6 phone
9.8”(D) x 3.75”(H) x 6.1”(W) or 24.9 x 9.5 x 15.5 cm
1.9 lbs or 0.9 kgs
MDC 9000 phone
9.4”(D) x 3.4”(H) x 7”(W) or 23.9 x 8.6 x 17.8 cm
2.8 lbs or 1.3 kgs
MDW 9000 phone
9.75”(D) x 6”(H) x 4”(W) or 24.8 x 15.2 x 10.1 cm
2.25 lbs or 1.0 kgs
Switch Fabric
Full digital, nonblocking
Electrical
U. S., Canada, and other 110V countries: 1 Amp per 206 module; .25 Amp per 200 module
Specifications
Countries using 220V: 0.6 Amp per 206 module; .25 Amp per 200 module
65 Watts (225 BTUs/hour) per 206 module; 10 Watts (35 BTUs/hour) per 200 module
Dissipation of power: 30W/206 module and 20W/200 module during normal operation
4-day memory backup (96 hours)
Extension
Ringing voltage: +5VDC, -140 VDC peak to peak; trapezoidal wave shaping
Jack
35- to 38-Volt talk battery
Specifications
Ringing frequency: 20 Hz
Proc. Module
80C321 microcontroller with 8K RAM and 64K ROM
Specifications
* The two devices combined on an extension jack can be a system phone with a standard device, or two standard devices; DO NOT
connect two system phones to the same extension jack. If a device lists two RENs, use the higher number when adding up RENs.
Specifications B-1