Filter
Top Products
Changing Settings From Extension 10
To store (or remove) remotely an Auto Dial number from a PARTNER-18D or
PARTNER-18 phone:
1.
2.
3.
4.
5.
6.
7.
8.
Using
1.
2.
3.
At extension 10, press [
Feature
] [
0
] [
0
].
Press left [
Intercom
] twice.
Press right [
Intercom
].
Dial the two-digit number of the extension (11–21) for which the number will be
stored (or removed).
Extension 10 now functions as if it were the extension for which the number
will be stored (or removed).
Press the button on which you want the Auto Dial number stored (or removed.)
To store the Auto Dial number, dial the number (up to 20 digits including
special functions). For example:
■
For an outside phone number, dial the phone number. For example, to
store 555-2398, press [
5
] [
5
] [
5
] [
2
] [
3
] [
9
] [
8
].
■
For an extension number, press left [ Intercom ] and the two-digit extension
number (11–21). Include a [
★
] before the extension number to
voice-signal the extension. For example, to set up a button to voice
signal extension 20, press left [
Intercom
] [
★
] [
2
] [
0
].
To remove the number from a button, press [ Mic/HFAI ] instead of dialing a
number.
To store (or remove) another number for the same extension, repeat steps 5
and 6. To store a number for a different extension, begin again at Step 3.
When you are finished, press [
Feature
] [
0
] [
0
].
You can lift the handset or press [ Spkr ], but you do not have to do so.
If you want to call on a specific line, press the desired line button.
Press the Auto Dial button on which the number is stored.
The system automatically selects a line for an outside number (if you did
not specify one), turns on the speaker (if the handset is in the cradle), and
dials the Auto Dial number. If you have a display phone, the number being
dialed will display on your phone.
Auto Dialing
5-5