Filter
Top Products
8-2 Issue 2 December 1995
Switch Integration Device Administration
Administer the Basic Parameters
In Chapter 3, "Switch Integration Planning", you completed switch integration
planning worksheets and determined the values for each of the basic
parameters. If you did not complete the worksheets, turn to Chapter 3 and
complete them now before you proceed with the instructions in this chapter.
After you complete the worksheets in Chapter 3, continue with the instructions on
the next page to configure the basic parameters.
1. To access the basic parameters edit forms, press on the SID
keypad.
After you press the key, you see the MCI MAIN MENU as shown in the
following example:
2. To set up the basic parameters for the MCI data link, press on the SID
keypad to select the SETUP option.
After you press the key, you see the SETUP menu as shown in the
following example:
3. Press on the SID keypad to access the first in a series of eight
PARAMS edit forms as shown in the following example:
0
4. Enter the number of analog voice mail ports from worksheet A that the SID
must support for the INTUITY System.
5. Press to confirm the number and move to the next basic parameter edit
form, the MSG DESK NUMBER form, as shown in the following example:
NEC 1-View 2-Utils 3-System
4-Setup 5-Logs
SETUP 1-Params 2-Ports 3-Clear
4-Advanced
SETUP Number of Ports 140
SETUP Msg Desk Number: 001
FUNC
4
1