Filter
Top Products
3-2 Issue 2 December 1995
Switch Integration Planning
Determining the Number of Voice
Mail Ports
You must specify the number of voice mail ports for the Switch Integration Device
(SID) to support and monitor.
The number of ports for the SID is the same as the number of ports assigned to
the INTUITY System. The maximum number of supported lines depends on the
switch software level. Your switch software must support the UCD overflow
feature. The SID assigns a default value of 140 to this field. To find the number of
voice ports assigned on the INTUITY System, refer to
INTUITY New System
Planning,
585-310-603. After you determine the number of voice mail ports you
need to assign on the SID, write the number on line 1 of Worksheet A.
Setting the Message Desk Number
The Simplified Message Desk Interface (SMDI) message desk number must
match the number assigned on the voice mail system. For an INTUITY System,
use the default value assigned to the SID. The default value is 001. Line 2 of
Worksheet A already contains the value 001 as the message desk number.
Worksheet A: Switch Integration Information
Line Field or Feature Name Value
1 Number of voice mail ports:
2 Message Desk Number: 001
3 CPID Pad String Number: 0000000
4 MWI Pad String Number: 0000000
5 MWI Feature:
(ENABLE = on, DISABLE = off)
6 MCI Baud Rate:
7 SMDI Baud Rate: