Filter
Top Products
Issue 2 December 1995 2-7
The Switch Integration Device Software
In the example, you use the MCI form to set the baud rate for the MCI link. You
can set the baud rate to specific values between 300 and 9600 baud. On the
form you see a default value of 1200. To see the other options, you press the left
arrow key to decrease the baud rate or press the right arrow key to increase the
rate. When you find the rate you want, press to confirm your choice. You
can recognize scroll item edit forms by the small arrow symbols (<- ->) shown
below the form name.
Edit Form Keys
Edit forms require you to enter data for SID setup and configuration. Most edit
forms have default values already entered on them. If you choose to use the
default value, press to exit the form. As you edit forms, you can move to
the next or previous edit form, return to the main menu, or access a help screen.
Refer to the table below for a list of keys and the action each key performs.
With some menu selections, you can access multiple edit forms that link together.
When you access multiple edit forms, press to move to the next form or press
to move to the previous form.
Key Action
1,2,3,4,5,6,7,8,9,0 Data entry keys
*,# Data entry keys
Func Return to main menu
Mode Help
Up Arrow Go to previous edit form
Down Arrow Go to next edit form
Right Arrow Get higher value
Left Arrow Get lower value
Enter Confirm entry
ENTER
FUNC