AT&T 2400 Cordless Telephone User Manual


 
Issue 2 December 1995 1-7
System Configuration
Intuity System Required Hardware
Table 1-1 lists the hardware components required on the Intuity system for the
NEAX integration.
Table 1-1. Intuity System Hardware Components Required for the Integration
Component Description
AT&T
Supplied
Customer
Supplied
MAP/5, MAP/40, or
MAP/100
Hardware platform that operates the
Intuity system software
X
IVC6 cards Integrated Voice Processing (IVC6)
cards used for voice port connections.
May have a maximum of 11 cards.
Includes any of the following hardware:
X
885A adaptors and cables X
25-ft. modular cords with 6-pin to 25-pin
adapters
X
Two high density cables, RJ21X, with a
356B adapter for T/R distribution
X
Multiport serial
port card
Equinox multiport card provides multiple
serial ports for adjunct component
connections. On the MAP/40 and MAP/
100, the COM ports are occupied by
other components and the Equinox card
must be used for the SID connection. On
the MAP/5, the COM1 port can be used
for the SID connection.
X
MAP5 only:
RS-232 cable
(DB-25)
For a COM1 connection on the MAP/5, an
RS-232 cable, DB-25, is required to
connect the SID to the Intuity system.
The cable includes a 25-pin to 9-pin
adapter (DB-9).
X
Equinox
connection only:
RS-232 cable with
6-pin to 25-pin
adapter
For a connection to the Equinox multiport
serial card, an RS-232 cable with a 6-pin
to 25-pin adapter is required.
X