AT&T 2400 Cordless Telephone User Manual


 
7-12 Issue 2 December 1995
NEAX 2400 Switch Administration
2. Enter 1 to select the System Data option. After you press you see
the Assignment Of Station Data screen as shown in Figure 7-7.
Figure 7-7. Assignment of System Data Screen
3. Enter 1 in the SYS field.
You can select three types of switch system parameters. Each type has a
different effect on the switch, as shown in the following list.
Type 1 — parameters that effect the entire system
Type 2 — parameters that effect specific system tenants
Type 3 — parameters that effect the system timing
MWL control effects the entire system.
4. Enter 28 in the INDEX field.
System data (SYS) 1, which you specified in Step 3, uses 255 indexes to
control a variety of system parameters. Index 28 controls MWLs.
5. Enter 20 in the DATA field.
The value of 20 works with the information you entered in SYS and INDEX
to set MWL control to the MCI link.
6. After entering the information, press to exit the screen and return to the
Installation Commands menu as shown in Figure 7-6.
ENTER
Assignment of System Data
SYS: 1 SYS : System Data Items
INDEX: 28 DATA: 20 1-System Data 1
2-System Data 2
3-System Data 3
TN : Tenant Number
INDEX: System Data Index
System Index
1 0-255
2 0-15
3 0-31
DATA : System Data (Hexa-decimal)
/