Filter
Top Products
B-4 Issue 2 December 1995
Using MCI Monitor Mode
The SID provides an MCI data link monitor that allows you to view transactions
sent between the switch and the SID. This view is similar in format to the SMDI
Monitor. The top line on the display shows message waiting commands and the
bottom line shows calling party data. Use the following instructions to use the
MCI monitor view:
1. Access the View menu as described in the previous section.
2. Press .
3. Press to select the MCI option. You see the following screen.
The display updates as packets are transmitted and received on the MCI data
link. You see the
Idle message
and the
Integration Stopped
message under the
same circumstances as in the SMDI monitor mode.
Using Statistics Mode
Use the following instructions to use the Statistics monitor mode.
1. Access the View menu as described in the previous section.
2. Press .
3. Press to select the Statistics option. You see the following screen.
The screen updates continuously, showing the total number of calls processed
and the number of bad packets received from the switch. The screen also shows
the total number of message waiting commands processed, the number of bad
MWI packets received from the INTUITY System, and the total number of MWI
commands residing in the SID’s queue. Use the Statistics mode to monitor
activity on your integrated system.
MCI .0!B230100000001.
STATS Calls: 978 BdPkts: 4
MWIs: 456 BdMWIs: 3 Q: 120-03%
MODE
2
MODE
3