Filter
Top Products
Issue 2 December 1995 C-1
C
Switch Administration for INTUITY
Lodging
Introduction
Appendix C describes the switch administration you need to complete if you
have INTUITY Lodging. Read the information and configure your switch as
required.
Hunt Group Administration
A hunt group is a set of extension numbers assigned to another phone number.
When a call is received by this number, a programmed search of the hunt group
is made and the call is forwarded to a member of the hunt group that is not busy.
For example, when two calls are made to the designated phone number, both
are forwarded to two free extensions in the hunt group. Hunt groups are a
commonly-used switch feature. Your switch probably has some hunt groups
already assigned.
In order to configure a hunt group for calls being received by the INTUITY system
you must:
1. Administer your switch to create a hunt group for your INTUITY system.
2. Have the switch ports that terminate the hunt group extensions wired to
the voice ports on the INTUITY platform. Wire them as described in one of
the following documents, depending on your system:
■
INTUITY™ MAP/5 Hardware Installation
, 585-310-146
■
INTUITY™ MAP/40 Hardware Installation
, 585-310-138
■
INTUITY™ MAP/100 Hardware Installation
, 585-310-139