Filter
Top Products
7-4 Issue 2 December 1995
NEAX 2400 Switch Administration
4. Enter 1 to select the Assignment of Station Data option and enter station
administration information for each voice mail port. After you select the
option, you see the screen as shown in Figure 7-3.
Figure 7-3. Assignment of Station Data Screen
5. In the TN (Tenant Number) field, you see a default value of 1. To select the
default value, press . The cursor moves to the STN field.
Contact your switch system administrator to determine if this value must
be modified.
6. At the STN (station) field, enter the number you plan to use as an analog
voice mail port extension. After you press the cursor moves to the
LENS field.
For example, if you want to assign extensions 500, 501, 502, and 503 to a
four port system, enter 500 as the first extension.
7. In the LENS (Line Equipment Number) field, you see a default value of
00000. Enter the correct LENS. After you press the cursor moves to
the TEC field.
Contact your switch system administrator for the correct line equipment
assignment.
8. In the TEC (Telephone Class) field, you see a default value of 1. Enter 3 in
the field to permit dial pulse and push button functionality. After you press
the cursor moves to RSC field.
Assignment of Station Data
TN: 1 STN: TN : Tenant Number
LENS: 000000 STN : Station Number
TEC: 1 RSC: 0 SFC: 0 LENS: Line Equipment Number (6 Digits)
TEC : Telephone Class (1-31)
1-DP (10PPS) 22-EMM
2-PB
3-DP/PB
11-VMM/VMZ
12-Dterm V
13-Data Terminal via Dterm V
14-Hot Line
15-Cas Line
RSC: Route Restriction Class (0-15) 16-Data Terminal via Data Module
for assignment of RSC,ARSC cmnd 18-Virtual Line Appearance
SFC: Service Feature Class (0-15) 19-TMM
for assignment of SFC,ASFC cmnd 20-PSM
ENTER
ENTER
ENTER
ENTER