AT&T 2400 Cordless Telephone User Manual


 
5-2 Issue 2 December 1995
Installing SID Software on the INTUITY System
Stop the Voice System
Before you can load the SID software, you must stop the voice system.
!
CAUTION:
All calls in progress will be disconnected.
Use the following procedure to stop the voice system.
1. Login as craft.
2. Press to accept the AT386 default.
You see the INTUITY Administration menu.
3. Select the following series of menu options:
After you select the last option, Stop Voice System, you receive the
following message:
Enter y to continue, n to quit.
4. Enter y to begin the process.
Before stopping the voice system, the system pauses until all calls in
progress disconnect. During the pause, you see a series of messages.
When all calls have disconnected, you receive the following message:
The Voice System has stopped
Press ENTER to continue...
5. Press .
The system returns you to the System Control menu.
6. Press until you see the INTUITY Administration menu.
You are now ready to load the SID software, as described in the next
section.
ENTER
>Stop Voice System
> System Control
> System Management
> Customer/Services Administration
ENTER
CANCEL