Filter
Top Products
Feature Reference
5-266
■ If the system is connected to a PBX or Centrex system and a dial-out code
(usually 9) is needed to place calls outside the PBX or Centrex system,
include the dial-out code and one or more pauses (if available) in Speed
Dial numbers that must dial out of the PBX or Centrex system.
■ If you program 911 or other emergency numbers as Speed Dial numbers
and want to place test calls, you should: 1) perform such activities in the
off-peak hours, such as early morning or late evening and 2) remain on the
line and briefly explain to the dispatcher the reason for the call before
hanging up.
■ You can use multiple Auto Dial buttons and Speed Dial numbers during the
course of a single call. For example, you can use an Auto Dial button or
Speed Dial number to dial the Account Code Entry feature code, and
another Speed Dial number to dial the account code.
Valid Entries
Any phone number—up to 28 characters consisting of the digits 0–9, *, #, and
special dialing functions that you can access by pressing
h (Pause),!
(Stop),
S (Recall), and & (Touch-Tone Enable)—assigned to codes 600
through 699
No number assigned to any code
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program System Speed Dial numbers:
1. Press
f 0 0 at extension 10 or 11. A display similar to the following
appears:
PROGRAM EXTENSION 10
2. Select a three-digit code by pressing
f and dialing three digits
between 600 and 699. For example, to select code 600, press
f 6
0 0.
If a number is assigned already to the code, the number appears on the
display. If no number is assigned to the code, the display reads:
Blank
3. Enter the number. For example, to program 555-4757,
press
5 5 5 4 7 5 7. The following display appears:
5554757
To mark the System Speed Dial number to override dialing restrictions,
precede the number by a
*. For example, to mark the number 555-1001,
press
* 5 5 5 1 0 0 1. The following display appears:
*5551001