Filter
Top Products
Feature Reference
5-10
Allowed List Assignments (#408)
Description
This System Programming procedure lets you assign up to eight Allowed Phone
Number Lists to a specific extension.
Related Features
You must use Allowed Phone Number Lists (#407) to create the lists of allowed
telephone numbers
before
you use this procedure.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To assign Allowed Phone Number Lists to an extension:
1. Press
f 0 0 s s # 4 0 8 at extension
10 or 11
.
2. Enter the number of the extension to be programmed. For example, to
program extension 27, press
2 7. A display similar to the following
appears:
AllowTo 27
List Number:
3. Enter the list number (1–8). For example, to select list 1, press
1.
4. To assign or unassign the list, press
D until the appropriate value
displays.
5. At this point:
■ To assign or unassign another list to this extension, press n
or until the list number shows on the display. Then repeat Step 4.
■ To program another extension, press N or P
and begin at Step 2.
6. Select another procedure or exit programming mode.