Filter
Top Products
Feature Reference
5-16
4. Press the Voice Interrupt On Busy Talk-Back button again (whether
or not the originator has hung up) to resume the conversation with
the third party.
The green light next to the Voice Interrupt On Busy Talk-Back button
turns off. Voice Interrupt On Busy Talk-Back is deactivated. The
originator hears two beeps if he or she did not hang up previously
.
■ To answer a coverage call:
1. If your phone is a covering extension and it rings, check your display
to see if the ringing call is a coverage call. Also, if you have an Auto
Dial button for the originating extension, the green light next to the
button flutters while the coverage call is ringing at your extension
(and it is the next ringing call you will answer if you lift the handset).
2. Lift the handset.
You are connected to the coverage call
.
3. The first coverage call to ring at your extension is identified in the
display. If more than one coverage call rings at your extension, you
can press the Caller ID Inspect button. Then press the line, pool, or
i button next to the flashing green light to view the number of
the extension from which a coverage call is being sent.
Standard Phone
If your standard phone has a button labeled “Recall” or “Flash,” use this button
whenever you are instructed to press the switchhook.
■ To answer a call:
When the telephone is ringing, lift the handset.
You are connected to the incoming call.
■ To answer a call when you are already on a call (you hear a call waiting
tone—two beeps):
1. Press the switchhook.
The call you are on is placed on hold and you are connected to the
new call.
2. To return to the first call, press the switchhook again.
3. You can continue to press the switchhook to move back and forth
between the two calls.
You cannot transfer either party, conference in additional parties, or
use feature codes while both calls are active.