Filter
Top Products
Feature Reference
5-22
Valid Entries
1 = Assigned
2 = Not Assigned
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the Automatic Extension Privacy setting for an extension:
1. Press
f 0 0 s s # 3 0 4 at extension
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 16, press
1 6.
3. To assign or unassign Automatic Extension Privacy, press
D until the
appropriate value displays.
4. To program another extension, press
n or p until the
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.