Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 23
Call Pickup - Group - D
term
- PRI C-97D
C-97D Call Pickup - Group - D
term
- PRI
General Description
This feature permits a user to answer any ISDN network call directed to another line in a preset CALL PICKUP -
GROUP by using a programmable line/feature key.
CALL PICKUP - GROUP - D
term
- PRI may seize the dial tone from any multi-line appearance on the D
term
.
Operating Procedure
To pick up an incoming call
1. Stations within the call pickup group ring.
2. Lift the handset; receive dial tone.
3. Press the CALL PICKUP - GROUP feature key; the call is connected to the station. The LCD displays:
Note: When the telephone number of the called/calling station exceeds 8 digits, the last 8 digits are displayed.
However, maximum 16-digit calling telephone number can be displayed on the middle line of the LCD depending on
the System Data.
To pick up an incoming call (Consultation Hold)
1. Stations within the call pickup group ring.
2. Press the TRANSFER or CALL HOLD feature key; receive special dial tone.
3. Press the CALL PICKUP - GROUP feature key; the call is connected to the station.
4. The first party is placed on hold.
To pick up an incoming call within the EXPANDED CALL PICKUP GROUP
1. A station within the EXPANDED CALL PICKUP GROUP rings.
2. Lift the handset; receive dial tone.
3. Dial the access code or press the feature key for EXPANDED CALL PICKUP; the call is connected to the
station.
Service Conditions
1. Stations with a fully restricted CLASS OF SERVICE - INDIVIDUAL [C-15] will be unable to answer
incoming Central Office calls using this feature. When such a station tries to pick up the call, busy tone is
returned.
2. A Call Pickup Group is defined as those stations with the ability to pick up each others calls using the
CALL PICKUP feature.
3. A maximum of 100 stations per group may be assigned. There is no limit to the number of groups per
system.
4. If CALL PICKUP is activated while two or more stations within the group are ringing, the system will
connect the calls in the order of priority assigned to the call pickup chain.
5. CALL PICKUP cannot be used to answer OUTGOING TRUNK QUEUING [O-2] or CALL BACK [C-1]
from another station.
6. The D
term
operation originating from a multi-line, picks up the call pickup group of My Line.
(Time Display)
PICK UP XXXX
Called
Station
Calling
Station/Trunk
XXXX