Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 164
NDA-24311, Issue 1
C-158 Call Forwarding Supplementary Service (SS-CF) with Rerouting
Interactions (cont’d)
7. When the OFF HOOK QUEUING [O-7] service is used with this feature:
SS-CFNR: When the call is forwarded to the trunk by SS-CFNR and the destination trunk is busy, OFF
HOOK QUEUING is not available (the call continues to be placed at the trunk).
SS-CF (except SS-CFNR):
When the idle destination picks up the call after the call is queued using OFF HOOK
QUEUING, the calling number display or the name display is not provided.
8. When the call forwarded by this feature is forwarded by AUTOMATIC ANNOUNCEMENT - CALLED
PS OUT OF ZONE [A-129]/CALL FORWARDING PS INCOMING CALL INCOMPLETE [C-155]
service due to that the call cannot terminate to the destination PS which is out of zone or whose power is
OFF, the calling number display or name display is not provided.
9. This feature requires 24DTI circuit card.
10. The conditions of displayed number at the destination are described below comparing with the CCIS
service.
a.) Call Forwarding - All Calls/Busy Line:
Q-SIG -The displayed number that indicates the connected party is changed from the called party
(forwarding party) to the destination before the destination answers the call (at the moment
the call is forwarded).
CCIS - The displayed number that indicates the connected party is changed from the called party
(forwarding party) to the destination after the destination answers the call.
b.) Call Forwarding - Don’t Answer:
Q-SIG -The displayed number that indicates the connected party is changed from the called party
(forwarding party) to the destination before the destination answers the call (at the moment
the No Answer timer has been elapsed).
CCIS - The displayed number that indicates the connected party is changed from the called party
(forwarding party) to the destination after the destination answers the call.
Rerouting Function
The calling party name or identification information is not displayed on the LCD of the destination station (Calling
Name Identification Presentation (CNIP)/Connected Name Identification Presentation (CONP) is not available)
while rerouting function is activated.