Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 20
NDA-24311, Issue 1
C-96 Call Forwarding - Busy Line - PRI
Service Conditions (cont’d)
8. If all stations in the terminating STATION HUNTING - CIRCULAR [S-7], STATION HUNTING -
SECRETARIAL [S-8], and STATION HUNTING - TERMINAL [S-9] groups are busy, the forwarding
call will hear busy tone and will not return to the calling party’s hunt group.
9. When MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service is activated, hunting is
performed at the last destination of the forwarded call, even though the multiple jumped stations are in a
hunt group.
10. When the pilot station of a STATION HUNTING - CIRCULAR [S-7], STATION HUNTING -
SECRETARIAL [S-8], and STATION HUNTING - TERMINAL [S-9] group activates CALL
FORWARDING - BUSY LINE to a station (not a member of a hunt group) and system parameters specify
that call hunting will not be activated at the forwarded station, the NEAX2400 IPX will send busy tone if
the forwarded station is busy. If the parameters specify hunting at the forwarding station, and if the
forwarded station is busy, the call will hunt in the forwarding station’s hunt group.
11. If the destination station of CALL FORWARDING - BUSY LINE - PRI is in a hunt group and is set to
CALL FORWARDING - BUSY LINE in the station of another hunt group, it can be determined through
system data, whether the calling party hunts to the called party’s hunt group or to the terminating party’s
hunt group when the forwarded-to stations are busy.
12. If the called station is the pilot of a UNIFORM CALL DISTRIBUTION (UCD) [U-1] group and activates
CALL FORWARDING - BUSY LINE, the calling station will queue to the UCD [U-1] group and will not
be forwarded.
13. If a calling station, ATTENDANT CONSOLE [A-3], or trunk receives busy tone after being call
forwarded - busy and activates EXECUTIVE RIGHT-OF-WAY [E-1], CALL WAITING -
ORIGINATING [C-31], CALL WAITING - TERMINATING [C-12] or BUSY VERIFICATION [B-3],
these services will be activated to the calling station.
14. There is no limitation to the number of stations that can set CALL FORWARDING - BUSY LINE
simultaneously.
15. The Attendant answering a forwarded call can identify the called telephone number on the ATTENDANT
CONSOLE [A-3] display.
16. If the station’s own telephone number is set for CALL FORWARDING - BUSY LINE, this feature is
changed to CALLING PARTY RECOGNITION SERVICE (CF - ALL CALLS/BUSY LINE/DON’T
ANSWER) [C-103].
17. This service is not available when the destination telephone number exceeds 13 digits.
18. This service is made available according to the system data of each tenant.
19. In the system basis CALL FORWARDING - BUSY LINE - PRI, the following Call Forwarding patterns
are available.
a.) ISDN trunk to a station