NEC NDA-24311 Answering Machine User Manual


 
NEAX2400 IPX ISDN Features and Specifications
Page 14
NDA-24311, Issue 1
C-95 Call Forwarding - All Calls - PRI
C-95 Call Forwarding - All Calls - PRI
General Description
This feature permits all calls from an ISDN network destined for a particular station to be routed to another station
(or Attendant), regardless of the busy or idle status of the called station. Activation and cancellation can be
accomplished by either the individual user or the Attendant.
Operating Procedure
To activate CALL FORWARDING - ALL CALLS - PRI from an individual station
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - ALL CALLS - PRI from an individual station
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - ALL CALLS cancellation code; receive service set tone.
To activate CALL FORWARDING - ALL CALLS - PRI from the ATTENDANT CONSOLE [A-3]
1. Press an idle loop key.
2. Dial the CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3. Dial the TENANT [T-12] number (2 or 3 digits).
4. Dial the originating telephone number.
5. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - ALL CALLS - PRI from the ATTENDANT CONSOLE [A-3]
1. Press an idle loop key.
2. Dial the CALL FORWARDING - ALL CALLS cancellation code; receive special dial tone.
3. Dial the TENANT [T-12] number (2 or 3 digits).
4. Dial the originating telephone number; receive service set tone.
Service Conditions
1. Stations with this feature set may originate calls and access the CALL FORWARDING - ALL CALLS
cancellation code.
2. There is no limitation to the number of stations that can set CALL FORWARDING - ALL CALLS - PRI
simultaneously.
3. Stations can be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15] programming in
system data.
4. When a call is forwarded to another station, one burst of ringing signal will be sent to the station to indicate
that it is call forwarded.
5. Stations activating CALL FORWARDING - ALL CALLS - PRI may be restricted from placing any calls
except to the Attendant. (This is an optional, programmable feature.)
6. CALL FORWARDING - ALL CALLS - PRI data remains in the data memory even if the system is
reinitialized or in the event of a power failure.
7. When users dial their own telephone numbers as the target telephone number after dialing the CALL
FORWARDING - ALL CALLS access code, CALLING PARTY RECOGNITION SERVICE (DIRECT-
IN TERMINATION (DIT)) [C-104] is activated.
8. This service is not available when the destination telephone number exceeds 13 digits.