NEC NDA-24311 Answering Machine User Manual


 
NEAX2400 IPX ISDN Features and Specifications
Page 78
NDA-24311, Issue 1
L-42D Last Number Call - D
term
- PRI
L-42D Last Number Call - D
term
- PRI
General Description
This feature allows a D
term
user to redial the numbers previously dialed from the terminal. With this feature, the
D
term
user can choose any destination out of the latest 5 calls stored in system memory, and place a call without
having to redial the full number.
Operating Procedure
To check the dialed numbers stored in the memory (up to 5 destinations)
1. Press the Redial key on a D
term
.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive dial tone from the speaker with the following display on the D
term
.
2. Press the Redial key on the D
term
again.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive dial tone from the speaker with the following display on the D
term
.
Note: The indication on the display is changed in sequence by pressing the Redial key. Once the stored number display
reaches LNR[#]/SPEED[]-5, LNR[#]/SPEED[]-1 appears again by pressing the Redial key.
To originate a call:
1. Press the Redial key on a D
term
.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive dial tone from the speaker with the following display on the D
term
.
2. Repeat the above procedure until you reach your desired destination.
LNR [#] / SPEED [_ _ _] - 1
811625643
MIC FDB FDN >>>
LNR [#] / SPEED [_ _ _] - 2
25191
MIC FDB FDN >>>
LNR [#] / SPEED [_ _ _] - 1
811625643
MIC FDB FDN >>>
LNR [#] / SPEED [_ _ _] - 4
82625191
MIC FDB FDN >>>