Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 91
Multiple Call Forwarding - All Calls - PRI M-75
Service Conditions (cont’d)
7. If the destination station is busy, the calling station may activate CALL BACK [C-1], CALL WAITING
- ORIGINATING [C-31], or EXECUTIVE RIGHT-OF-WAY [E-1] to the destination station.
8. When MULTIPLE CALL FORWARDING - ALL CALLS occurs, the display of the calling party’s D
term
shows the called telephone number and terminating telephone number. The display of the terminating
party’s D
term
shows the calling party (station or trunk) and the called number.
9. If the destination station in a combined MULTIPLE CALL FORWARDING - ALL CALLS and CALL
FORWARDING - BUSY LINE [C-2] is set to CALL FORWARDING - DON’T ANSWER [C-3], then
MULTIPLE CALL FORWARDING - DON’T ANSWER [M-25] is put into effect. If the destination
station from the CALL FORWARDING - DON’T ANSWER [C-3] is set to CALL FORWARDING -
BUSY LINE [C-2] or CALL FORWARDING - ALL CALLS [C-5], forwarding is restricted.
10. If two stations have CALL FORWARDING - ALL CALLS [C-5] set to each other, an incoming call to
either of these stations will not be forwarded; therefore, an infinite loop will not occur.
11. If the incoming call returns to a station that has already taken part in the multiple jump service (Busy or
All Calls), then CALL FORWARDING - ALL CALLS [C-5] service from that station will not be
performed, and the system will ignore that station's forwarding service.
12. If an incoming call encounters MULTIPLE CALL FORWARDING - ALL CALLS and the destination is
the ATTENDANT CONSOLE [A-3], the incoming call appears on the ATND key.
13. If the destination station of MULTIPLE CALL FORWARDING - ALL CALLS - PRI is in a hunt group
and is set to CALL FORWARDING - BUSY LINE [C-2] to a station in another hunt group, it can be
determined, through system data, whether the calling party hunts to the called party's hunt group or the
terminating party’s hunt group when forwarded-to stations are busy.
14. If the destination of MULTIPLE CALL FORWARDING - ALL CALLS - PRI is the pilot of a UNIFORM
CALL DISTRIBUTION (UCD) [U-1] group, UCD [U-1] is executed.
15. If a member of a UCD [U-1] group is a member of a MULTIPLE CALL FORWARDING - ALL CALLS-
PRI sequence, that station is skipped in UCD [U-1] hunting.
16. When users dial their own telephone numbers as the target telephone number after dialing CALL
FORWARDING - ALL CALLS access code, CALLING PARTY RECOGNITION SERVICES
(DIRECT-IN TERMINATION (DIT)) [C-104] is activated.