Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 90
NDA-24311, Issue 1
M-75 Multiple Call Forwarding - All Calls - PRI
M-75 Multiple Call Forwarding - All Calls - PRI
General Description
This feature permits a call from the ISDN network to a station set to CALL FORWARDING - ALL CALLS - PRI
[C-95] to be forwarded multiple times to a predesignated idle station.
Operating Procedure
To set CALL FORWARDING - ALL CALLS - PRI [C-95] from an individual station
1. Lift the handset; receive dial tone.
2. Dial the specific CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - ALL CALLS - PRI [C-95] from an individual station
1. Lift the handset; receive dial tone.
2. Dial the specific CALL FORWARDING - ALL CALLS cancel code; receive service set tone.
To set CALL FORWARDING - ALL CALLS - PRI [C-95] from the ATTENDANT CONSOLE [A-3]
1. Press an idle loop key.
2. Dial the specific CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3. Dial the TENANT [T-12] number (two or three digits).
4. Dial the originating telephone number.
5. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - ALL CALLS - PRI [C-95] from the ATTENDANT CONSOLE [A-3]
1. Press an idle loop key.
2. Dial the specific CALL FORWARDING - ALL CALLS cancel code; receive special dial tone.
3. Dial the TENANT SERVICE [T-12] number, (two or three digits).
4. Dial the originating telephone number; receive service set tone.
Service Conditions
1. MULTIPLE CALL FORWARDING - ALL CALLS - PRI service can forward a maximum of five times
when the called station sets CALL FORWARDING - ALL CALLS [C-5] to a station that has set CALL
FORWARDING - ALL CALLS [C-5] or CALL FORWARDING - BUSY LINE [C-2].
2. MULTIPLE CALL FORWARDING - ALL CALLS service can only be performed by the voice port of a
D
term
, or a single line telephone.
3. If a calling party has been set to CALL FORWARDING - ALL CALLS [C-5] five times and encounters
the sixth CALL FORWARDING - ALL CALLS [C-5], the calling party will not be forwarded; but will
receive busy tone when the destination station is busy, or ringback tone if the destination station is idle.
4. If the destination of CALL FORWARDING - ALL CALLS [C-5] is set to CALL FORWARDING -
BUSY LINE [C-2], forwarding occurs.
5. When combining CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING - BUSY
LINE [C-2], the calling party hears busy tone, if the fifth destination station is busy.
6. If the destination in a MULTIPLE CALL FORWARDING - ALL CALLS is busy, and CALL
FORWARDING - BUSY LINE [C-2] or CALL FORWARDING - ALL CALLS [C-5] has not been set,
the calling party receives busy tone.