Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 113
Speed Calling - System - PRI S-82
S-82 Speed Calling - System - PRI
General Description
This feature allows a user or ATTENDANT CONSOLE [A-3] to call frequently dialed ISDN numbers using fewer
digits (abbreviated call codes) than would normally be required.
Operating Procedure
To operate
1. Lift handset; receive dial tone.
2. Dial the Speed Calling access code (maximum three digits).
3. Dial the abbreviated call code (maximum four digits). The call is completed.
Service Conditions
1. Speed Calling codes programmed into system data are accessible by all stations with a CLASS OF
SERVICE - INDIVIDUAL [C-15] permitting Speed Calling.
2. Each abbreviated call code can store a maximum of 24 digits, including access codes.
3. The maximum number of Speed Calling numbers that can be stored in the system is 1000.
4. Speed Calling numbers are programmed via system data entry from the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
5. Stations can be denied access to Speed Calling via CLASS OF SERVICE - INDIVIDUAL [C-15]
assignment in system data. Speed Calling can also be allowed or denied on either a system or tenant-wide
basis.
6. TOLL DENIAL/TOLL DIVERSION [T-6] and TOLL RESTRICTION - 3/6- DIGIT [T-7] may or may
not be applied to Speed Calling, as desired.
7. LEAST COST ROUTING - 3/6-DIGIT [L-5] can be provided via Speed Calling access.