Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 110
NDA-24311, Issue 1
P-47 Paging Transfer - PRI
P-47 Paging Transfer - PRI
General Description
This feature allows a user to transfer a paged call to a party that has been placed on hold.
Operating Procedure
When a user is engaged in a call from the ISDN network
1. User presses the switchhook; receives special dial tone.
2. User dials the Paging access code; receives continuous ringback tone for approximately one second.
3. User pages the desired party.
Two methods that the paged party answers
1. Non-Delay System: On dialing the Paging Answer access code, the party paged is immediately connected
to the PAGING station.
2. Paging Transfer Supervision: The Paging user replaces the handset after the page. By dialing the Paging
Answer access code, the paged party is directly connected to the party on hold.
For Non-Delay System, when a Paging station replaces the handset after talking with the paged party, the
held party is directly connected to the paged party.
Service Conditions
1. Paging trunks can be assigned a maximum of six routes.
2. Either one of the two answering methods can be selected as per the related system data. The table below
shows the related system data assignment.
3. When the paging route has been accessed, but the paging call remains unanswered for a predetermined
time, the paging service is automatically cleared. The timer for the paging unanswer is set by the related
system data.
No. Sys. Index Bit Bit Content Answering System
1 1 73 0, 1 00 No Answering
01 Non-Delay
11 Paging Transfer Supervision