Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 61
Faulty Trunk Report - PRI F-26
F-26 Faulty Trunk Report - PRI
General Description
This feature allows a station to report a noisy or faulty ISDN trunk number by dialing a special access code before
hanging up. The FAULTY TRUNK REPORT consists of trunk number, telephone number, associated time division
switch and reported time. This information is displayed at the MAINTENANCE ADMINISTRATION TERMINAL
(MAT) [M-18] and/or fault printer.
Operating Procedure
To enter a FAULTY TRUNK REPORT
1. Switchhook flash before disconnecting; receive special dial tone.
2. Dial the FAULTY TRUNK REPORT access code; receive service set tone.
3. The MAT [M-18] records the FAULTY TRUNK REPORT and returns the line to the original connection.
Service Conditions
1. This feature can be accessed during any two-party connection.
2. The following information appears on FAULT TRUNK REPORT:
a.) Telephone number
b.) Trunk route number
c.) Trunk number
d.) Time division switch
e.) Time and date
3. Stations are assigned this feature according to CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in system data.
4. When this feature is activated, a supervisory alarm (yellow) appears on the NEAX2400 IPX.