Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 34
NDA-24311, Issue 1
C-102 Call Pickup - Direct - PRI
C-102 Call Pickup - Direct - PRI
General Description
This feature allows a user to pick up an ISDN call to another station in the system by dialing a specific call pickup
code.
Operating Procedure
To pickup an incoming call
1. Lift the handset; receive dial tone.
2. Dial the CALL PICKUP - DIRECT code; receive second dial tone.
3. Dial the specific telephone number to be picked up. The incoming call is connected to your station.
Service Conditions
1. This feature is provided on a per line basis, based on the station CLASS OF SERVICE - INDIVIDUAL
[C-15].
2. A station in a fully restricted class cannot answer an ISDN call using CALL PICKUP - DIRECT - PRI
[C-102].
3. If the ringing call is a result of CALL BACK [C-1], CALL HOLD [C-6] Recall, CALL TRANSFER
[C-\11] Recall or OUTGOING TRUNK QUEUING [O-2] Recall, it cannot be picked up by any station.
4. This feature cannot be accessed from the ATTENDANT CONSOLE [A-3].
5. Both stations in this procedure must belong to the same tenant group.
6. A busy station can accomplish CALL PICKUP - DIRECT - PRI by placing an existing call on hold.
7. CALL PICKUP - DIRECT - PRI cannot be accessed while in the CONSULTATION HOLD [C-17] mode.