Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 132
NDA-24311, Issue 1
T-40 Toll Denial/Toll Diversion - PRI
T-40 Toll Denial/Toll Diversion - PRI
General Description
This feature prohibits users from placing long distance calls over the specific ISDN network trunks. Restricted calls
are routed to either an ATTENDANT CONSOLE [A-3] (diversion) or to the reorder tone (denial).
Operating Procedure
No manual operation is required once this feature is programmed into system data.
Service Conditions
1. TOLL DENIAL/TOLL DIVERSION - PRI is an industry standard 0/1 type.
2. Immediately after dialing any area code with a second digit 0 or second digit 1, the user is restricted.
3. Restricted calls are normally routed to reorder tone. Restriction can be programmed to give the user
reorder tone or to divert him/her to the ATTENDANT CONSOLE [A-3] when the user accesses DIRECT
OUTWARD DIALING [D-9].
4. This feature is applied to individual stations on a route restriction basis.
5. TOLL DENIAL/TOLL DIVERSION - PRI is set on a per TENANT [T-12] basis.
6. The 0/1 toll denial and toll diversion feature cannot be used together for the same tenant.
7. The 0/1 toll denial and toll diversion feature is assigned on a per-line (RSC) Class of Service and/or
per-incoming-dial-repeating-tie-trunk group basis. When provided, the feature is applicable on a
per-trunk-group basis.