Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
Page 158
NDA-24311, Issue 1
C-158 Call Forwarding Supplementary Service (SS-CF) with Rerouting
Operating Procedure
To set the service
The SS-CF service setting should not be duplicated. The following operations (either by the access code or by the
feature/soft key) should be performed for each service.
Note: The CF-B and CF-NR can be set/cancelled at one time depending on the system data.
Using the access code
1. Lift the handset; receive dial tone.
2. Dial each access code for setting the corresponding Call Forwarding service; receive special dial tone.
3. Dial the destination’s number; receive service set tone.
4. Replace the handset.
Using the feature/soft key
1. Lift the handset; receive dial tone.
2. Press each feature/soft key for setting the corresponding Call Forwarding service; receive special dial tone.
3. Dial the destination’s number; receive service set tone.
4. Replace the handset.
To cancel the service
Using the access code
1. Lift the handset; receive dial tone.
2. Dial each access code for canceling the corresponding Call Forwarding service; receive service set tone.
3. Replace the handset.
Using the feature/soft key
1. Lift the handset; receive dial tone.
2. Press each feature/soft key for canceling the corresponding Call Forwarding service; receive service set
tone.
3. Replace the handset.
Service Conditions
Call Forwarding - Supplementary Service
1. The conditions for service set/cancel are the same as those of CALL FORWARDING - ALL CALLS [C-
5]/BUSY LINE[C-2]/DON’T ANSWER[C-3].
2. The allowable terminals for this service are a D
term
, analog station, ISDN terminal, PCS and Attendant
Console.
3. This feature is available with ETS 300 172 interface.
4. This feature is restricted by the Service Feature Restriction Class (SFC) that denies CALL
FORWARDING - BUSY LINE [C-2]/DON’T ANSWER [C-3]/ALL CALLS [C-5].
5. The name display for supplementary information is available with this feature if Name Identification
supplementary services (ETS 300 238) are provided.
6. The conditions for the display, transmission, set or cancel of the name display function, the supplementary
service of this feature, are the same as those of Name ID function provided as the supplementary service
of Q-SIG. Refer to CALLING NAME IDENTIFICATION (CNIP)/CONNECTED NAME
IDENTIFICATION PRESENTATION (CONP) [C-153].