Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 19
Call Forwarding - Busy Line - PRI C-96
C-96 Call Forwarding - Busy Line - PRI
General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station, or to the
ATTENDANT CONSOLE [A-3].
If a called station is in a hunt group and forwards calls to another hunt group, it can be determined through system
data whether the calling party is directed to the called parties hunt group, or to the terminating parties hunt group,
when all of the forwarded stations are busy.
Operating Procedure
To set CALL FORWARDING - BUSY LINE - PRI from an individual station
1. Lift the handset, receive dial tone.
2. Dial the CALL FORWARDING - BUSY LINE access code; receive special dial tone.
3. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - BUSY LINE - PRI from an individual station
1. Lift the handset, receive dial tone.
2. Dial the CALL FORWARDING - BUSY LINE cancel code; receive special dial tone.
To set CALL FORWARDING - BUSY LINE - PRI from the ATTENDANT CONSOLE [A-3]
1. Press an idle loop key.
2. Dial the CALL FORWARDING - BUSY LINE access code; receive special dial tone.
3. Dial the TENANT SERVICE [T-12] number (2 digits).
4. Dial the originating telephone number.
5. Dial the desired target telephone number; receive service set tone.
To cancel CALL FORWARDING - BUSY LINE - PRI from the ATTENDANT CONSOLE [A-3]
1. Press an idle loop key.
2. Dial the CALL FORWARDING - BUSY LINE cancel code.
3. Dial the TENANT SERVICE [T-12] number (2 digits).
4. Dial the originating telephone number; receive service set tone.
Service Conditions
1. This feature can be set and cancelled by either the user or the Attendant.
2. CALL FORWARDING - BUSY LINE data remains in the data memory even if the system is re-initialized
or in the event of a power failure.
3. Stations are assigned this feature according to CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in system data.
4. Registration memories for CALL FORWARDING - BUSY LINE and CALL FORWARDING - DON’T
ANSWER [C-3] are common. Changing system data will enable separation of the two, permitting separate
access codes to be assigned.
5. CALL FORWARDING - BUSY LINE can be provided on a system and/or an individual basis.
6. Call Forwarding on a system basis allows any incoming calls, which encounter a busy condition, to be
forwarded to a predetermined station or the ATTENDANT CONSOLE [A-3].
7. Individual CALL FORWARDING - BUSY LINE supersedes system basis call forwarding. If a station is
busy, the CALL FORWARDING - BUSY LINE on system basis is available if the station has not set the
service.