Filter
Top Products
NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 117
Station Message Detail Recording - PRI S-83
Service Conditions (cont’d)
29. DIRECT INWARD DIALING (DID) [D-8] trunk calls: If the call is to the Attendant, the Attendant can
input an account code before extending the call.
30. INDIVIDUAL TRUNK ACCESS [I-4]: The Attendant cannot dial in an SMDR account code before using
direct trunk selection.
31. Incoming tie trunk calls: If an incoming call to the Attendant is extended, the Attendant can input an
account code.
32. CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25]: When an incoming trunk call
receives intercept treatment routing it to the Attendant, SMDR functions as if the Attendant was dialed
directly.
33. Night service: When the system is in the night service mode, SMDR records calls routed to the Night
station (answering station).
34. CALL-BY-CALL SERVICE SELECTION - PRI [C-105]: Only Trunk Provisioning service is available.
35. OUTGOING TRUNK QUEUING [O-2]: The SMDR records the dialed account code. When the caller is
called back with a trunk, the account code does not need to be reentered.
36. REMOTE ACCESS TO SYSTEM [R-2]: If the call is terminated in the PBX or tandeming through the
PBX, the remote access trunk and route numbers are recorded. A FORCED ACCOUNT CODE [F-7] can
be requested upon entry to the network via remote access. If a FORCED ACCOUNT CODE [F-7] is used,
it can be recorded by SMDR.
37. SERIAL CALL [S-15]: The duration of the total call is recorded on the last station call.
38. STATION HUNTING - CIRCULAR [S-7], STATION HUNTING - SECRETARIAL [S-8], STATION
HUNTING - TERMINAL [S-9]: The hunted-to station is recorded in the called number field.
39. TANDEM SWITCHING OF TIE TRUNKS 2/4 WIRE [T-1] calls: The calling number is the incoming
trunk route plus trunk number; the called number is the number dialed.
40. CALL WAITING - TERMINATING [C-12], CALL WAITING - ORIGINATING [C-31]: The called
number is recorded and SMDR recording of call duration begins when the station answers.
41. UNIFORM CALL DISTRIBUTION (UCD) [U-1]: The calling number is the incoming trunk route plus
the trunk number. If the call is to a PBX station, the station answering the number is recorded as the dialed
number.
42. On an incoming trunk call to the Attendant, the Attendant call record starts upon answer and completes
when the Attendant releases. A station call record starts when the Attendant releases and completes when
the station goes on-hook. If required, a station record will not be generated if the station does not answer.
43. A system option is available to allow or restrict call completion in the case where a failure occurs in
transmitting SMDR data from the Local Processor to the I/O port.
44. Additional hardware is required to implement this feature.