Filter
Top Products
Dolphin® 9500 Series User’s Guide Rev C 5 - 11
Wireless Tab
Determines the power settings for your wireless connection.
Select Wireless signals off when you don’t want to use system power to power up the radio(s).
Select Wireless signals on when you want the radio to use system power to transmit. This is the default setting.
The list contains the radio firmware installed in the terminal. The selected items are the items using system power.
Advanced Tab
Determines power time-outs.
For On battery power, select the number of minutes of inactivity you want to pass before the terminal powers off
when running on battery power.
For On external power, select the number of minutes of inactivity you want to pass before the terminal powers off
when running on external power.
Options below the tabs
Adjust backlight opens the Backlight settings so that you can make adjustments to conserve power usage; see
Backlight on page 5-7.
Change beam opens beam settings so that you can make adjustments to conserve power usage; see Using
Infrared on page 6-5. (You would turn off receiving capabilities to conserve power.)
You can also set automatic turn-off times for the terminal to conserve power.
When the device is “turned off,” that means that it goes into Suspend Mode (see page 2-11).
Regional Settings
Regional Settings enables you to customize the appearance and formatting to your geographic region. Specifically, you can
customize numbers (number of decimal places allowed, for example), currency (using the $ or
€
€ symbol, for example), time, and
date. These specifications apply to all screens, including the Today screen.