Dolphin Peripherals 9500 PDAs & Smartphones User Manual


 
8 - 22 Rev C Dolphin® 9500 Series User’s Guide
3. As directed on the next two screens, assign the phone a unique name, set the phone to Discoverable mode, and tap Next.
4. The device searches for the phone. When the search is over, a list of the discovered Bluetooth phones appears.
5. Choose the phone you want to connect to, and tap Select. A service discovery phase begins, about 5-10 seconds.
6. The next two screens describe procedures you complete outside of the wizard. Read through each screen but do not
complete the described procedures until you exit the wizard.
Bonding with your phone - This must be completed to establish the Bluetooth connection and involves dial-up
networking.
Automatic Connections - This procedure is optional but makes future Bluetooth connections more convenient.
7. Continue to the last screen of the wizard and tap Finish. Now proceed to STEP 6 to complete the bonding process and, if
desired, set up automatic connections.
Dial Up Connection
Complete the following steps to create a new Bluetooth internet connection via an ISP. Before setting up dial-up networking,
prepare yourself with dial-up information and other necessary settings from your office network or isp. Also, refer to Microsoft’s
connection manager for additional information.