Filter
Top Products
Dolphin® 9500 Series User’s Guide Rev C 9 - 23
GPRS Settings
uPhone includes pre-configured GPRS connection profiles to connect to a GPRS network. When the GSM driver is enabled
uPhone selects the appropriate pre-configured profile based on the service provider information on the installed SIM card.
Before connecting to GPRS, you need to confirm and save the selected uPhone GPRS profile (or create one) in uPhone GPRS
Settings, then enter the ISP information in Microsoft’s connection manager.
The default profiles are for a modem connection. However, you can also configure GPRS for VPN or Proxy Server connections
by creating a GPRS connection profile for that connection type in Microsoft’s connection manager.
Requirements
No ActiveSync Make sure that you are not connected to a host PC via ActiveSync when configuring the connection
settings!
Service Provider Information
You need the APN Number, and User name and Password from your network service provider.
Configuring the GPRS Connection
The GSM driver installs pre-configured GPRS connection profiles. When enabled, the GSM driver reads the installed SIM card
and selects the matching pre-configured connection profile.
1. Tap Start > System > Connections tab > uPhone GPRS. The GPRS Settings screen appears with the selected profile in
the Current Profile drop-down list. .
2. In the Current Profile drop-down list, select the profile associated with your account.
The Details section is already complete. A default GPRS profile (for a modem connection) is created in Microsoft’s
connection manager based on the profile selected here.
If your profile does not appear in the Current Profile list, select Add new and complete the Details section.
3. In the Details section
• Type in the APN number
• Type in the IP address (Leave blank to use DHCP.)
• Select the Protocol
4. Tap OK. You return to the Connections tab.