Filter
Top Products
12 - 12 Rev C Dolphin® 9500 Series User’s Guide
Wall Mounting
You can purchase a wall mount kit that contains
• a mounting bracket,
• three screws, and
• six washer/nut sets.
The back wedge of the mounting bracket contains an open slot for the power and communications cables. There is an extra
space between this slot and the rear panel of the HomeBase to allow easy access to the power and communications ports. For
more details on both ports, see Rear Panel on page 12-3.
Turn the secured
HomeBase right
side up.
Attach the
bottom panel to
the mounting
bracket; match
the holes to the
secured screws.
4.
2.
Back wedge Open slot for cords
Insert a screw into the
round end of each screw
slot on the bottom panel.
Slide each screw towards
the narrow end of the slot.
Then, use a washer/nut set
on each screw to secure
the screw in the slot.
Use the remaining washer/
nut sets to secure the
mounting brackets to the
bottom panel.
Secure the back wedge of
the mounting brackets to a
stable vertical surface.
1.
3.
5.