Filter
Top Products
Dolphin® 9500 Series User’s Guide Rev C 5 - 9
To increase Program or Storage memory, tap, hold, and drag the slider towards the kind of memory you want to
increase. The three fields adjust automatically; Program memory decrease when you increase Storage memory
and vice versa.
Storage Card Tab
This tab displays the current capacity and usage statistics of the selected memory type - IPSM or Storage Card.
Select the memory type from the drop-down list; IPSM is selected by default.
IPSM
Short for Intel Persistent Storage Manager, IPSM is the 14MB of on-board Flash memory that is non-volatile.
Because this memory is non-volatile, data or programs stored in IPSM are not affected when power is removed.
Autoinstall programs, for example, are stored in IPSM so that they are always installed during startup. When IPSM
is selected in the drop-down list, the Storage Card tab displays the IPSM memory capacity and usage statistics.
Storage Card
You can install additional memory in Dolphin terminals - see SD Memory on page 3-8. If a storage card is installed
in the terminal, Storage Card appears in the drop-down list.
Select Storage Card and the Storage Card tab displays the current capacity and usage statistics of the installed
storage card.
Total storage card
memory
The total memory of the memory type selected in the drop-down list.
In use The amount of memory being used by the selected memory type.
Free The free memory available of the selected memory type.