Filter
Top Products
5 - 8 Rev C Dolphin® 9500 Series User’s Guide
CPU Speed
This system setting enables you to see and change the current speed of the Central Processing Unit (CPU).
The default is High Speed at 400MHz. Low Speed is 200MHz.
To change the default, select Low Speed and tap OK. A message appear confirming the changed and now current CPU speed.
Tap OK to save the change.
Memory
The Memory system setting enables you to review and manage both RAM (volatile) and IPSM/Storage Card (non-volatile)
memory. Dolphin terminals contain 64MB of on-board, volatile RAM memory. Open the Memory setting whenever you receive
system messages about memory.
There are three tabs: Main, Storage Card, and Running Programs.
Main Tab
This tab displays the available, in use, and remaining RAM memory used for running and storing programs as well
as storing program data.
Fields Under Storage and Program
To Increase/Decrease RAM Memory
Field Description
Total main memory Total RAM memory.
Storage RAM memory being used for storing programs and program data.
Program RAM memory being used to run programs.
Allocated RAM memory allocated for Storage vs. Program use.
In use RAM memory being used by Storage vs. Program memory functions.
Free RAM memory available for Storage and Programs use.