Filter
Top Products
© 2006 Verizon
Verizon One User Guide
59
15.2.2 Call Back
If the “Verizon One” user presses <OFF>
to transfer a call and the Base does not
answer, after 30 seconds of ringing, the
Base will stop ringing and the ringing will
“return” to “Verizon One.” The Base will
acknowledge the “Line In Use” screen
and the call will be “called back” to
“Verizon One.” “Verizon One” will ring
and display a “Call back” message to let
the Handset user know that this is the
external call coming back.
To accept the call back, the “Verizon One”
user presses the <TALK> button to be
reconnected.
If the “Verizon One” user selects [Exit]
or presses <OFF> during the Call
back, “Verizon One” will stop ringing,
drop the external call, and return to the
Standby screen. The external call is now
disconnected. If the “Verizon One” user
does not answer the Call back and does
not select [Exit] or press <OFF>, the call
will ring until the caller hangs up.
15.3 3-Way Conferencing
With an external call on Hold with
“Verizon One”, and while “Verizon One”
is on an intercom call with the Base,
a 3-way conference may be started
between “Verizon One,” the Base and
the external caller. To set up 3-way
conferencing, “Verizon One” presses
<Hold> or [Unhold]. After either of these
keys is pressed, both “Verizon One” and
the Base will display the screen below:
15. Using Intercom and Call Transfer Functions