Filter
Top Products
© 2006 Verizon
Verizon One User Guide
57
15.1.2 No Answer From a Page
If a Page is not answered, a “No answer”
message will be displayed on the device
that originated the Page when:
• There is no answer from the Paged
party after two minutes
• The Paged party chose not to answer
by pressing [Exit] or <OFF> “Verizon
One
.” The Handset can respond to a
“No answer” message in one of the
following ways:
• Select [Exit] and the Handset returns to
a Standby screen
• Press <OFF>
• Wait for the Page to timeout and return
to the Standby screen
15.1.3 Using the Intercom During an
Active Call
When you are on an active call, press
<Intercom> on the Handset which will
put the call On Hold and start the paging
menu. The Base will automatically
be paged. You will see “Call on Hold”
BLINKING on the Handset screen.
Select [Exit] or press <Intercom> if you
want to stop paging, take a call off hold, or
return to the TALK mode
:
If <Speakerphone> or <Intercom>
is pressed on the Base, an intercom
connection is established with “Verizon
One,” and “Base”. The external call is still
on Hold. The Talk screen will alternate with
the “Intercom Base Vol-2” and the “Call on
Hold” screen in 1-second intervals.
If the Base disconnects the Intercom page
the “Verizon One” Handset will return to a
TALK mode and display the “Call on Hold”
message. You can then press [Unhold] to
return to the external call
:
This same process is used to Transfer
a Call or to Conference the external
caller with the Handset and the Base, as
described in the next sections:
15. Using Intercom and Call Transfer Functions