Filter
Top Products
© 2006 Verizon
Verizon One User Guide
112
20.2 Important Information About Your
Verizon One
Home Network
(cont’d)
Note: Hereafter, the Verizon One
Communications Subsystem will be
referred to as “Verizon One
,”
“Gateway,” or “Modem.”
Your Verizon One
Wireless Home
Network was shipped to you disabled
(turned OFF). Enable (turn ON) your
Wireless Network by:
1. Selecting
Menu on the Verizon One
touch-screen display
2. Select
Settings
3. Select Wireless
The Wireless Network screen on the
Verizon One
touch-screen display will also
allow you to create your Wireless Network
Name (called a Service Set ID
or SSID). The default SSID for Verizon
One is: Verizon One followed by the
last 4-digits of the unit’s serial number
(located below the bar code on the bottom
of the unit). For example: VerizonOne1234.
20.3 Installing Your Verizon One
Home Network
This section explains how to install your
Verizon One Home Network:
• Home Networking System
Requirements – See Section 20.3.1
• Verizon One
LED Indicators – See
Section 20.3.2
• Verizon One
Interface Descriptions
– See Section 20.3.3
•
Installing a Wired Network – See
Section 20.3.4
•
Installing a Wireless Network – See
Section 20.3.5
•
Installing both a Wired and a Wireless
network simultaneously – See Section
20.3.6
20. Home Networking