Filter
Top Products
© 2006 Verizon
Verizon One User Guide
51
14.2 Add a New Name (cont’d)
1. Enter a name with up to 11 characters
at the blinking underscore using the
keypad characters (0-9, *, #).
Note:
If you try to input more than 11
characters, an error tone will be
heard and additional input will not be
accepted.
If you are saving a Name from your
Incoming Calls Log, the caller’s
Name will be already be displayed in
the “Name” field as it appeared on
your Caller ID, as displayed below:
2. Select [Clear] to delete (backspace)
characters.
3. Press <OFF> to return to the Standby
screen. This will cancel your input. Or,
4. Press <Up/Down> while you are at
the Name screen to display the
Number screen
:
5. Enter a number at the blinking
underscore using the keypad
characters (0-9, *, #). Ignore dashes
as they will be inserted for you.
If you are saving a Number from
your Incoming Calls Log, the caller’s
Number will be displayed in the “Name”
field as it appeared on your Caller ID, as
displayed below:
6. Select [Clear] to delete (backspace)
numbers, if you make an error.
Note:
Press the # symbol once to
enter “#.” Press the # symbol twice to
insert “P,” which provides a 3 second
pause during dialing. If you try to input
more than 24 digits, an error tone wil
l
be heard and additional digit input will
not be accepted.
14. Using the Handset Phonebook Menu