Filter
Top Products
5-16
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Managing Gateways
Managing Gateways
Table 5-7 Managing Gateways
Task Sample Command
Viewing H.323 gateways
status h323-gw id=CHINA-1;
Possible RAS states:
• CCH323_RAS_STATE_NONE—operational state is ADMIN
OOS
• CCH323_RAS_STATE_GRQ—Gatekeeper Discovery state
• CCH323_RAS_STATE_RRQ—Gateway Registration state
• CCH323_RAS_STATE_IDLE—ready for calls
• CCH323_RAS_STATE_URQ—Un-registration state.
Setting the state of H.323
gateways
control h323-gw id=CHINA_1; target-state=INS;
Viewing signaling gateway
processes (SGPs)
status sgp id=sgp1;
Viewing media gateways
status
status mgw id=c5300_197;
Possible states:
• ADMIN-INS—In-service
• ADMIN-OOS—Out of service
• ADMIN-MAINT—Maintenance Mode
• ADMIN-OOS-PENDING—Transitioning to out of service
• ADMIN-MAINT-PENDING—Transitioning to Maintenance
Mode
Reporting all MTAs that use
“best effort” (non DQoS) calls
in the network having or not
having a specific aggr id
report mgw id=%; oper-status=qos-best-effort; aggr-id=aggr1;
start_row=1; limit=5;
Displays the output as CLI as the output-type has not been mentioned
or
report mgw id=%; oper-status=qos-best-effort; aggr-id=%;
output-type=xml; start_row=1; limit=5; output=report;
Displays the output in the specific format (CSV/XML) based on the
output-tpye specified
Note The output displays only those mgws that use NCS variant.