Filter
Top Products
6-8
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 6 Using BTS Measurements
Learning the Measurement Types
CALLP_MGCP_SS7_CALL Successfully completed calls from an MGCP originator to an SS7 terminator.
CALLP_MGCP_TERM_ATTMP MGCP terminating call attempts.
CALLP_MGCP_TERM_FAIL MGCP terminating call attempts that failed.
CALLP_MODEM_MEDIA_SETUP_
FAIL
Failed Modem calls. These calls fail because of resource or priority limits.
CALLP_MODEM_MEDIA_SETUP_
SUCC
Successfully completed Modem calls.
CALLP_NAS_ADMIN_REBOOT Admin Reboot - Reason Code 807 - that are received in the DLCX messages.
CALLP_NAS_ADMIN_RESET Admin Reset - Reason Code 806 - that are received in the DLCX messages.
CALLP_NAS_AUTH_FAIL Failed NAS Authentication Requests.
CALLP_NAS_AUTH_SUCC Successful NAS Authentication Requests.
CALLP_NAS_CALLBACK NAS Callback - Reason Code 816 - that are received in the DLCX messages.
CALLP_NAS_CLD_UNACC NAS calls that failed on the reporting CA due to the called party number being
blocked
CALLP_NAS_CLG_UNACC NAS calls that failed on the reportingCA due to the calling party number being
blocked
CALLP_NAS_HOST_REQUEST Host Request - Reason Code 818 - that are received in the DLCX messages.
CALLP_NAS_IDLE_TIMEOUT Idle Timeout - Reason Code 804 - that are received in the DLCX messages.
CALLP_NAS_ISP_PORT_LIMIT NAS calls that failed on the reporting CA due to the port limit of a modem being
exceeded
CALLP_NAS_LOST_CARRIER Lost Carrier - Reason Code 802 - that are received in the DLCX messages.
CALLP_NAS_LOST_SERVICE Lost Service - Reason Code 803 - that are received in the DLCX messages.
CALLP_NAS_NAS_ERROR NAS Error- Reason Code 809 - that are received in the DLCX messages.
CALLP_NAS_NAS_REBOOT NAS Reboot- Reason Code 811 - that are received in the DLCX messages.
CALLP_NAS_NAS_REQUEST NAS Request - Reason Code 810 - that are received in the DLCX messages.
CALLP_NAS_NO_MODEMS NAS calls that failed on the reporting CA due to the unavailability of a modem
CALLP_NAS_OP_FAIL Operation failures that occurred on the reporting CA - typically indicative of a
modem failure
CALLP_NAS_PORT_ERROR Port Error- Reason Code 808 - that are received in the DLCX messages.
CALLP_NAS_PORT_PREEMPTED Port Pre-empted - Reason Code 813 - that are received in the DLCX messages.
CALLP_NAS_PORT_SUSPENDED Port Suspended - Reason Code 814 - that are received in the DLCX messages.
CALLP_NAS_PORT_UNNEEDED Port Unneeded - Reason Code 812 - that are received in the DLCX messages.
CALLP_NAS_SERVICE_UNAVAIL Service Unavailable - Reason Code 815 - that are received in the DLCX messages.
CALLP_NAS_SESSION_TIMEOUT Session Timeout - Reason Code 805 - that are received in the DLCX messages.
CALLP_NAS_USER_ERROR User Error - Reason Code 817 - that are received in the DLCX messages.
CALLP_NAS_USER_REQUEST User Requests - Reason Code 801 - that are received in the DLCX messages.
CALLP_NCT_TEST_SUCC Successful Network Continuity Tests completed.
Table 6-3 Call Processing Measurements (continued)
Measurement
Description
(* = rapid count could mean a potential problem in the system)