Filter
Top Products
A-5
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Appendix A Feature Tones
Tones per Feature
DPU STUTTER TONE The subscriber has dialed DPU access code, and DPU access has been
granted.
REORDER TONE Reorder tone is returned to the subscriber who initiated a DPU request
when any of the following occurs:
• The dialed extension is not assigned in the business group
dialing plan.
• The line associated with the dialed extension is not assigned the
DPU feature.
• The line associated with the dialed extension is neither being rung
nor involved in a stable two-way call. (Note that “being rung” should
not include being given call-waiting treatment. Note also that DPU
should not allow a subscriber to barge-in on the controller of a
multiway connection, that is, a call-waiting configuration, a
call-hold configuration, or a conference call.)
• The call is abandoned by the caller before the DPU request is
recognized or has been picked up by a line without DPU assigned.
• The requesting line is not allowed to pick up the particular call
because of being assigned the fully restricted terminating or the
denied termination feature.
CONFIRMATION TONE Barge-in connection is being processed and connection will occur within
one second.
Note Confirmation tone is repeated twice.
DRCW ALERTING PATTERN 1 DN of incoming call is not on the DRCW screening list.
ALERTING PATTERN 6 DN of incoming call is on the DRCW screening list.
CW TONE DN of incoming call is not on the DRCW screening list.
CW TYPE 4 DN of incoming call is on the DRCW screening list.
Emergency—911 ALERTING PATTERN 1 After a normal two-party call, the subscriber presses the Flash button or
hookswitch, dials 911, and then hangs up before the 911
operator answers.
MDN ALERTING PATTERN 1 Station is on hook and there is an incoming call to primary DN.
ALERTING PATTERN 4 Station is on hook and there is an incoming call to secondary DN.
ALERTING PATTERN 5 Station is on hook and there is an incoming call to the third DN.
CW TONE Station is off hook and there is an incoming call to primary DN.
CW TYPE 2 Station is off hook and there is an incoming call to secondary DN.
CW TYPE 3 Station is off hook and there is an incoming call to the third DN.
MWI
3
MWI TONE The subscriber has MWI service and has a message waiting.
MIDCALL STUTTER TONE After pressing Flash button or hookswitch and the BTS acknowledges it
is as a valid midcall action.
ALERTING PATTERN 1 The subscriber goes on hook with the other party still on hold; the BTS
provides alerting pattern (ringing).
Table A-1 Feature Tones (continued)
Feature Tone Condition(s) That Initiate Tone
1