Cisco Systems 10200 Telephone User Manual


 
4-3
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 4 Operating the BTS
Managing Subscribers
Viewing
subscribers
voice mail
indicator
(VMI) status
status subscriber ID=278-222-1917
Note For MGCP subscribers only.
Resetting
subscribers
voice mail
waiting
indicator
(VMWI)
control subscriber ID=278-222-1917; mwi=on
or
control subscriber ID=278-222-1917; mwi=off
Reporting all
subscribers that
use “best
effort” (non
DQoS) calls in
the network
having or not
having a
specific aggr id
report subscriber id=%; oper-status=qos-best-effort; aggr-id=aggr1; start_row=1; limit=5;
Displays the output as CLI as the output-type has not been mentioned
or
report subscriber id=215-222-0502; oper-status=qos-best-effort; aggr-id=%;
output-type=xml; start_row=1; limit=5; output=report;
Displays the output in the specific format (CSV/XML) based on the output-tpye specified
Note The output displays only NCS subscribers.
Changing
subscribers
ring and call
waiting tone
change dn2subscriber DN=4692553010; RING_TYPE=4; CWT_TYPE=4;
Note The CWT_TYPE has no effect on SIP subscribers. Their IP phones control how they receive call
waiting tones.
Deleting
subscribers
secondary DNs
Delete one secondary DN for a subscriber:
delete dn2subscriber FDN=4692553010;
Delete all secondary DNs for a subscriber:
delete dn2subscriber SUB_ID=SUBSCRIBER_1; VIRTUAL_DN=Y;
Table 4-1 Managing Subscribers (continued)
Task Sample Command