Filter
Top Products
A-2
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Appendix A Feature Tones
Tones per Feature
CW
CIDCW
CW TONE If called party has MDN feature: primary DN matched.
If called party is in Centrex system with DACWI: there is no extension
for the number dialed.
If called party has DRCW feature: calling party is not on the DRCW
screening list.
2
CW TYPE 2 If called party has MDN feature: second DN matched.
If called party is in Centrex system with DACWI: extension exists for the
number dialed.
CW TYPE 3 If called party has MDN feature: third DN matched.
CW TYPE 4 If called party has DRCW feature: calling party is on the DRCW
screening list.
2
STUTTER TONE For Centrex subscriber with CHD feature and currently on an active call:
A third party calls in, and the called party hears a call-waiting tone. The
called party presses Flash button or switchhook to place the current
remote station on hold, and hears the stutter tone.
The called party has the following options:
• Press Flash button or switchhook again to return to the original call.
• Dial a designated vertical service code (VSC)—typically *52—to be
connected to the new calling party; the first calling party is kept
on hold.
TONES OFF No tones are played for CW or CIDCW. (Tones are turned off under
certain special circumstances.)
ALERTING PATTERN 1 Alerting pattern (ringing) is provided to the calling party and
called party, as applicable, for all reconnect, re-ring, callback and
recall scenarios.
CCW CONFIRMATION TONE The subscriber in two-way call cancels call waiting.
DIAL TONE POTS or Centrex subscriber picks up phone to cancel call waiting.
STUTTER TONE The subscriber places the other party on hold (CHD) and then activates
CCW while call is still on hold.
ALERTING PATTERN 1 The subscriber goes on hook with the other party still on hold; the BTS
provides alerting pattern (ringing).
CDP DIAL TONE The subscriber is granted access to an outside (public) line, typically
after dialing 9.
ALERTING PATTERN 3 Member of a Centrex group receives an incoming call from the
group attendant.
CFU REMINDER RING TONE Alerting pattern (ringing) is provided on the called station to indicate that
a call has been received and automatically forwarded.
Table A-1 Feature Tones (continued)
Feature Tone Condition(s) That Initiate Tone
1