Cisco Systems 10200 Telephone User Manual


 
6-69
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 6 Using BTS Measurements
Learning the Measurement Types
TRKGRP_OUTBOUND_FAIL Times the system tries to access any trunk for an outbound call unsuccessfully within
the reporting trunk group:
In the case of a SIP trunk, this is incremented for each outgoing initial Invite request
failure over a SIP trunk. For each failure response received over a trunk for any
other failure causing failure of the outbound call setup. If an Invite is cancelled, the
measurement for failure is not incremented as this includes just an outbound call.
This counter does not include the follwoing types of SIP calls: Abandon, User busy,
No answer.
In the case of an H.323 trunk, this is incremented for each Outgoing Setup sent on
a trunk that failed when not associated with a H.323 subscriber.
TRKGRP_OUTBOUND_SUCC Number of established outbound calls on a SIP trunk.
TRKGRP_OUTG_ATTMP Times the system tries to access any trunk for an outbound call within the reporting
trunk group:
In the case of a SIP trunk, this is incremented for each received SetupReq request
for a SIP trunk.
In the case of an H.323 trunk, this is incremented for each Outgoing Setup sent on
a trunk when not associated with a H.323 subscriber.
TRKGRP_OUTG_BUSY_TRK Summation (CCS based) of trunk circuits within the reporting trunk group marked as
busy with originating calls taken every 100 seconds during the interval. This is not
incremented for SIP or H323 trunk groups.
TRKGRP_OUTG_CALL_ABDN Number of outgoing abandoned SIP trunk calls at the reporting call agent.
For SIP trunks only.
TRKGRP_OUTG_CALL_NOT_A
NS
Number of outgoing SIP trunk calls not answered by a called party.
For SIP trunks only.
TRKGRP_OUTG_END_USR_BU
SY
Number of SIP trunk calls not completed because the called party was busy.
For SIP trunks only.
TRKGRP_OUTG_USAGE Summation (CCS based) of trunk circuits within the reporting trunk group marked as
busy or in the maintenance state with originating calls taken every 100 seconds during
the interval.
This is mapped to the same value as the TRKGRP_OUTG_BUSY_TRK in this release.
This will be re-implemented to account for the MAINT state in a later release.
TRKGRP_RBLK_TRK_USAGE The CCS value for trunks that are Remote Blocked in the reporting trunk group for this
reporting period. This is not incremented for SIP or H323 trunk groups.
TRKGRP_REGISTERS_RECVD
TRKGRP_SIP_3xx_RX Number of 3xx class (REDIRECTION) messages the reporting call agent received on a
SIP trunk group.
TRKGRP_SIP_3xx_TX Number of 3xx class (REDIRECTION) messages the reporting call agent transmitted on
a SIP trunk group.
TRKGRP_SIP_4xx_RX Number of 4xx class (REQUEST FAILURES) messages the reporting call agent
received on a SIP trunk group.
Table 6-39 Trunk Group Usage Measurements (continued)
Measurement
Description
(*=rapid count could mean a potential problem in the system)