Cisco Systems 10200 Telephone User Manual


 
A-3
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Appendix A Feature Tones
Tones per Feature
CFU-ACT STUTTER TONE The subscriber has successful activated CFU from the handset.
DIAL TONE The subscriber has dialed the CFU-ACT star code, and the BTS is ready
to receive digits for the forward-to DN.
1-second timer elapses following the confirmation tone.
CONFIRMATION TONE Centrex subscriber successfully activates extension forwarding.
If the subscriber has multiple call forwarding (MCF), the subscriber has
successfully activated a chain call forwarding scenario
POTS subscriber receives ROUTE SELECTED DIALING PLAN.
REORDER TONE The CFU-ACT attempt was not successful due to
Attempt to activate CFU when it was already activated
Attempt to forward calls to a DN that could not be reached
Attempt to forward call from a DN to itself.
CFU-DEACT CONFIRMATION TONE The subscriber successfully deactivates CFU.
DIAL TONE 1-second timer elapses following the confirmation tone.
REORDER TONE The subscriber attempts to deactivate CFU when it was already
deactivated
CFB-ACT and
CFNA-ACT
DIAL TONE The subscriber has dialed the CFB-ACT or CFNA-ACT star code, and the
BTS is ready to receive digits for the forward-to DN.
CONFIRMATION TONE The subscriber successfully activates CFB or CFNA.
DIAL TONE 1-second timer elapses following the confirmation tone.
CFB-DEACT and
CFNA-DEACT
CONFIRMATION TONE The subscriber has dialed the CFB-DEACT or CFNA-DEACT star code,
and CFB or CFNA has been deactivated.
DIAL TONE Issued after a 1-second timer elapses following the confirmation tone.
CHD STUTTER TONE For Centrex subscriber (controlling party) currently on an active call:
The controlling party places the other party on hold by pressing the Flash
button or switchhook, and hears the stutter tone.
Controlling party has the following options:
Press Flash button or switchhook again to return to the original call.
Dial a designated vertical service code (VSC)—typically *52—hear
the stutter tone again, then dial a third party. The first calling party
is kept on hold.
ALERTING PATTERN 1 Alerting pattern (ringing) is provided to the calling party and
called party, as applicable, for all reconnect, re-ring, callback and
recall scenarios.
CNAM
CND
No tone
Table A-1 Feature Tones (continued)
Feature Tone Condition(s) That Initiate Tone
1