Filter
Top Products
6-71
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 6 Using BTS Measurements
Learning the Measurement Types
Announcement Measurements
H.323 Protocol Measurements
Table 6-40 Announcement Measurements
Measurement
Description
(*=rapid count could mean a potential problem in the system)
ANM_SEASONAL_SUSPEND calls that cause the CA to play the seasonal suspend announcement.
ANM_CKT_UNAVAIL calls resulting in the playing of the circuit unavailable announcement
ANM_CALL_REJECTED calls resulting in the playing of the call rejected announcement
ANM_ADDR_INCOMPLETE calls resulting in the playing of the address incomplete announcement
ANM_FAC_REJECTED calls resulting in the playing of the facility rejected announcement
ANM_PRE_0_1_ABSENT calls resulting in the playing of the prefix of 0 or 1 absent announcement
ANM_PRE_0_1_PRESENT calls resulting in the playing of the prefix 0 or 1 present announcement
ANM_HNPA_ABSENT calls resulting in the playing of the HNPA area code announcement
ANM_NO_ROUTE_DEST calls resulting in the playing of the no route to destination announcement
ANM_UNALLOCATED_NUM calls resulting in the playing of the unallocated directory number announcement
ANM_NUM_CHANGED calls resulting in the playing of the directory number changed announcement
ANM_DEST_OUTOFORDER calls resulting in the playing of the destination out of order announcement
ANM_TEMP_DISCONNECT calls resulting in the playing of the temporarily disconnected announcement
ANM_FEAT_NOT_SUBS calls resulting in the playing of the feature not subscribed to announcement
ANM_AUTHCODE_INVALID calls resulting in the playing of the authorization code invalid announcement
ANM_NO_RTE_TRANSITNW calls resulting in the playing of the no route to specified network announcement
ANM_CAUSE_UNKNOWN calls resulting in the playing of the cause unknown announcement
ANM_EMG_CKT_UNAVAIL calls resulting in the playing of the “No Emergency Circuit Available” announcement.
Table 6-41 H.323 Protocol Measurements
Measurement
Description
(*=rapid count could mean a potential problem in the system)
H323_SETUP_RX H323 SETUPs received
H323_SETUP_TX H323 SETUPs transmitted
H323_SETUP_FAIL H323 SETUPs that failed. The failure is due to one of the following scenarios:
unable to send due to full socket queue, unable to compose message due to
invalid socket, or lack of available memory.
H323_CONNECT_RX H323 CONNECTs received
H323_CONNECT_TX H323 CONNECTs transmitted
H323_CONNECT_FAIL H323 CONNECT CONFIRMs that failed. The failure is due to one of the
following scenarios: unable to send due to full socket queue, unable to
compose message due to invalid socket, or lack of available memory.
H323_ALERT_RX H323 ALERTs received